ADT® Authorized Dealer Serving Minneapolis & The Twin Cities Metro Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Minneapolis Home

Homeowners must protect against numerous risks like burglary, fire, and flooding. But what about a risk that you can’t smell or see? Carbon monoxide creates an uncommon challenge as you may never know it’s there. Nevertheless, implementing CO detectors can easily shield your family and property. Learn more about this hazardous gas and where to place carbon monoxide detectors in your Minneapolis residence.

What Is Carbon Monoxide?

Referred to as the silent killer because of its absence of odor, taste, or color, carbon monoxide is a commonly found gas formed by incomplete fuel combustion. Any appliance that uses fuels like an oven or furnace may generate carbon monoxide. Although you usually won’t have any trouble, difficulties can arise when appliances are not regularly serviced or properly vented. These mistakes could lead to an accumulation of the potentially lethal gas in your home. Generators and heaters of various types are the most frequent causes for CO poisoning.

When in contact with low levels of CO, you might suffer from dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to high concentrations could cause cardiopulmonary arrest, and even death.

Tips On Where To Place Minneapolis Carbon Monoxide Detectors

If you don’t have at least one carbon monoxide detector in your home, purchase one today. Ideally, you should have one on every floor of your home, including basements. Explore these tips on where to place carbon monoxide detectors in Minneapolis:

  • Place them on each floor, specifically where you use fuel-burning appliances, like furnaces, gas dryers, fireplaces, and water heaters.
  • You should always install one no more than 10 feet away from bedroom areas. If you only install one CO detector, this is the place for it.
  • install them at least 10 to 20 feet away from potential CO sources.
  • Do not position them immediately beside or above fuel-utilizing appliances, as a non-threatening amount of carbon monoxide might be discharged when they kick on and trigger a false alarm.
  • Attach them to walls about five feet above the floor so they will test air where inhabitants are breathing it.
  • Avoid using them in dead-air areas and next to windows or doors.
  • Place one in areas above garages.

Check your CO detectors routinely and maintain them according to manufacturer recommendations. You will typically have to switch them out in six years or less. You should also make sure any fuel-consuming appliances are in in proper working order and adequately vented.